Achievement unlocked -- Sourdough Hongkong-style charsiu (and other fillings) bao

Classic charsiu bao

As a maker/baker, i will readily admit that frozen bao and dimsum are staples of our family's Asian market grocery cart for easily-prepared, fuss-free eating for all four in our household. 

Recently though, I decided to deep-dive into making our own freezer stash of Hongkong-style steamed bao -- slightly sweet dough, that signature popped-open top, a size that went easily into heavy snack/small meal. I knew the regular yeasted doughs would produce a good siopao with a smooth surface, but i fixated on that flower-like peekaboo, a cushiony, not-too-bready texture, and of course a well-flavored filling of charsiu pork. Using my sourdough starter, of course.

peekaboo filling is peeking a little too much!

The rabbit hole of what makes the ideal bao bun led me to Souped-up Recipe's Mandy Fu. Some of the ingredients she calls for are specialized, and definitely lean toward the alkaline -- lye water and ammonium carbonate, as well as baking powder. Why? Because the acidity of the fermented starter combines with these to produce a light, cottony texture that has no rise time and should be shaped and steamed immediately. I did this, hunting down baker's ammonia, and the yellow-labelled lye water that weren't available at my regular Asian market -- when I asked the owners, they said nobody used it anymore except big bakeries. 

If bao are the only thing you ever make with a pre-ferment, by all means use Ms. Fu's yeast-based 3-day starter -- it is a build that gives you the exact amount you need for a batch. On the other hand, if you have a starter that is alive and well, a few feeds will get it to the point where it is perfect for this use. 

Most steamed bao doughs use cake flour -- it gives a biscuity, less chewy quality to the end result, and is responsible for the steaming opening up the top because the dough is shaped but not too glutenous.  I wanted something that had some chew, as well as enough structure to hold in the saucy filling. 

It's still a work in progress, but this is by far the closest I have gotten to my own personal charsiu bao goal. It makes 24, because this is to stock the freezer!

Chicken meatball bao

Sourdough build: 

200 g mature sourdough starter

60 g all-purpose flour (bleached ok)

40 g fine rice flour

60 g water

Repeat the same 60% feed every 8-12 hours twice more without discarding any, so that you have approximately 680 g. pre-ferment. This will feel in between a stiff starter and a liquid one, because of the extra starch and 60% hydration. Let rise after the last feed until it doubles, about 6 hours to up to overnight.

Have 24 3x3 paper squares or standard cupcake liners ready, and water for steamer baskets heating.

640 g starter

266 g sugar

40 g shortening or lard

16 drops lye water

Mix until smooth, either with the dough hook or by hand.

1 tsp baker's ammonia

300 g all-purpose flour

60 g fine rice flour (360 g cake flour if you prefer, see above)

2 tbsp baking powder

Knead smooth, then divide into 50 g pieces. Keep covered. Dust the surface with rice flour and roll a piece into a circle. Thin out the edges with a rolling pin, so that the circle is about 4 1/2" wide (12 cm).  

Center 30 g filling* and pinch the top closed into quarters. Try to keep the filling centered and the top not too thick. Place on the prepared paper. 

Repeat to fill a steamer (but don't crowd them -- leave room for the buns to fluff), then place above the rolling-boil water.  If your steamer is bamboo, enough water vapor will escape that your buns will have the needed moisture; but if your steamer cover is metal or glass, secure a kitchen towel around it to absorb extra water so it doesn't drip back down onto the buns and cause spots or sogginess. Steam for 16-18 minutes, tightly covered. 

Remove from the water, but allow to cool for 10 minutes before uncovering so the buns don't collapse. Do the same for all the pieces, setting them onto a rack to cool out of the baskets.

Once the buns are all cooked and cooled, place them in a single layer in a gallon freezer bag and freeze flat. When they are frozen solid, you can stack the bao to conserve space and minimize air in the bag. 

*filling possibilities: charsiu pork or chicken in a gingery, oyster/hoisin cornstarch-thickened sauce (pork/chicken asado); ground turkey or chicken or shrimp meatball with Chinese chives, lap cheong or yun chang sausage and hard-boiled eggs, either quartered or quail ("bola bola"); cornstarch-thickened custard.

the leav(en)ing of the known... sourdoughnuts!

 Sourdough has a rep for being the no-nonsense, savory, earth-attuned kind of bake-craft. Doughnuts are the opposite of that -- fried, usually pretty sweet from being sugar-tossed or glazed and/or filled, with endless permutations of dress-up. There is the cronut, a hybrid of the flaky layers and oil-cooking, but even that  has the frippery of lamination.

Given that I put starter in everything, is it any wonder that Sacchi would eventually find her way into doughnut dough? I consider this my last goodbye to a workplace that has seen me through some pretty cool, and some pretty rough, times, including many a doughnut station.

Why has it taken me this long to put up a post about these doughnuts I've been making for years? I really don't know. 

 

Raised doughnuts are fried yeast dough; in theory, one can toss any kind of bread dough into boiling oil and out will come some semblance of satisfactory vehicle for glaze and filling. But good doughnuts are sweet dough, not too tough and lean like baguette dough, and not too high in fat, eggs or sugar that they disintegrate into the hot oil or sponge it up into soggy greasy sadness.

So what you need is a dough with enough structure to hold its shape as it rises, but soft enough so that the hot oil can cook the mass through in the time that it takes to brown the outside. Tender, flavorful but not too overwhelmingly bready, and with good handling so you can shape, rise and cook without panic.

(Cake doughnuts are another thing entirely. More thoughts on those another time, since of course. That other staple, fried choux/ French crullers, is again a different situation to talk about.)

Sure, you can fry brioche... but one doesn't need to go through the process of a sponge and careful gradual incorporation of butter if you're going to fry it, really. And brioche lacks the wherewithal to stand the manipulation that doughnuts must undergo. Best to leave brioche as little rolls or loaves that never see the fryer, and instead make a simpler dough which uses well-aged natural leavening to boost lightness and dexterity as well as flavor.

It's good to have all the ingredients on the cool side of room temp, as the mixing of the hook warms them up to the ideal fermenting zone.

Sourdoughnuts -- makes approximately 30, depending on size

225 g active starter

3 eggs

45 g sugar

7 g dry yeast, mixed with 15 g water

300 g bread flour

7 g sea salt

95 g butter, cubed 

In the bowl of a stand mixer, combine the starter, eggs, sugar and dissolved yeast. Mix with a hook until the yolks are evenly dispersed.

Add the flour and salt and mix for 6 minutes on low speed. Look for the dough to be dry at first, then get sticky as the flour hydrates. 

Add the butter cubes and mix another 2 minutes, then 5 minutes on medium speed. The dough should be smooth and elastic, and stick to itself more than the bowl. If it doesn't, add a bit more flour and mix until it does.

Turn the dough into a greased square or rectangular container that can contain double its volume. Cover with plastic wrap and let rise in the fridge 30 minutes; it should be puffy and cold all the way through.

Pick up the top two corners of the dough and press them to the middle; turn the container around and repeat for the other two corners. Deflate the whole mass and fold it in half, still in the container. Cover, refrigerate again and let rise another 20-30 minutes, until it has doubled.

Turn the dough out onto a floured surface. 

Roll about 1/2 inch (1.5 cm) thick to cut with doughnut cutters -- 2.5 inch (6 cm) diameter outside, 3/4 inch (2 cm) inside. 

Alternatively, divide into 25-30 g pieces and round into seamless balls for filled doughnuts. 

As they are cut/shaped, space the doughnuts with enough room to rise on a nonstick mat- or greased paper-lined pan.

They can either rise at room temperature (depending on the dough temperature, it should take 15 -20 minutes), or refrigerated up to two days. For longer storage, freeze immediately (up to 2 weeks) then let rise and defrost at room temp.

Heat 2-3 inches (5-7.5 cm) of oil to 350F (180C) in a wide deep pot. Once the doughnuts are light to the touch, carefully place them 3 or 4 at a time in the pot, turning immediately so the whole surface of each has contact with the oil. This helps to keep the doughnuts round by stopping the surface from drying and causing uneven rising. Push them under the surface of the oil occasionally to cook the insides and prevent a white ring around the middle.

As they turn golden, drain the doughnuts on paper towels and keep them warm in a turned-off oven as you fry the rest.

While they are warm, roll the doughnuts in cinnamon sugar or granulated sugar. To fill them, poke a hole in the worse-looking side with a 1/4 inch (6 mm) plain piping tip while they are warm and the insides are not yet set. Let them cool before filling with jam or pastry cream.

For icing or glazing, let the doughnuts cool completely.

Chocolate doughnut glaze:

300 g confectioner's sugar

50 g unsweetened cocoa

40 g milk

2.5 g salt

200 g semisweet or bittersweet chocolate, melted and warm

Stir all together until smooth. Add boiling water to get a coating texture; if too thin, let cool. Dip doughnuts after filling.

Back to basics: Revel (Oatmeal Fudge) Bars

Revel Bars and I go way back. The original was on a recipe card from Toll House i think, and ever since i was 10 or 12 i have been making them; there was a time that pans of these were flying out the door by the dozen as holiday orders. High school and college friends made these one of my signatures, and the aroma of them baking gives me flashbacks to the 80's and 90's. (Scrunchies are back with a vengeance, so there! May we never see the high teased bangs again though.)

This recipe has survived the food-snobbery of side-eyeing anything using canned milk, and has been improved by using good chocolate and a judicious amount of salt. Quick-cooking oats create the best texture; old-fashioned or steel-cut hydrate differently and don't make a satisfying layer.
For this post I decided to go full flashback and make them as I first did, with a hand mixer and countertop toaster/oven. Obviously a "serious" mixer makes quicker, handier work of the oatmeal base, but they taste the same regardless.

Revel Bars -- 1 10x15 pan
1 stick/8 oz/228 g butter or   margarine (one case where there's   no marked difference), divided       into 7 oz (200 g) and 1 oz (28 g)
2 cups/14 oz/400 g brown sugar
2 eggs
2 1/2 cups/11 oz/ 325 g all-purpose flour
3 cups/9 oz/260 g. quick-cooking oats (oatmeal)
1/2 tsp/2.5 g salt
1/2 tsp/2.5 g baking soda
1 14 ounce/400 g can sweetened condensed milk
12 ounces/340 g good-quality bittersweet chocolate
2 tsp vanilla extract

Line a 10x15 rectangular pan with foil or parchment. Preheat the oven to 350F/170C.
For the oatmeal base: Put the 7 oz/200g butter in a mixer bowl. Add the brown sugar to the mixer bowl and cream together until fluffy and light. Beat in the eggs until smooth, then the dry ingredients. Mix on medium speed to a thick batter.
For the fudge: Put the 1 oz/28g butter, condensed milk and chocolate in a microwave-safe bowl or measuring cup. Microwave on full power in 30-second bursts, stirring each time, until just melted. Add the vanilla and stir smooth.
Using your hands and an offset spatula, press 2/3 of the oatmeal base into your prepped pan. Spread the fudge on the oatmeal base, covering it completely. Dot the remaining oatmeal base by the spoonful on top of the fudge layer, spacing evenly.
Bake about 25-30 minutes until the oatmeal part is lightly browned and doesn't hold a dent when you press a fingertip in. Cool on a rack, then carefully lift the slab out of the pan using the parchment or foil onto a cutting board. Cut into 24-30 bars with a serrated knife. 
These taste best warm but not hot, an hour or two out of the oven. To get that texture after, microwave a bar approximately 8 seconds on high power.

Half the batch fits in a 9x9 square pan; check after 15 minutes. Cut in 12-16 bars.

Sewing up: Part 2 of the pull-on/peasant jumpsuit tutorial, with a special split-sleeves bonus mini-tutorial

AAAnd we are back, ready to put the cut-out pieces together. Go HERE for Part 1, the pattern draft and cutting. (Note that I used a print here, so it's easier to see right and wrong sides.)

To recap, you will have EITHER a front and back top, sleeves, and left and right pants and pockets, for a jumpsuit with a waist seam; OR a full body front and back, sleeves, and pockets, for a jumpsuit with a vertical center seam.

First, the pockets. 
Serge or finish all the edges of the pocket pieces. Press 1/2 inch (12 mm) on each straight side to the wrong side, then clip the corners to reduce bulk. Press the curved edge as well, clipping into the curve as necessary. Stitch down that curved edge, which is your pocket opening.

Pin the pockets into place on the pants pieces on the right side, then topstitch the straight edges, backstitching or lockstitching at the edges of the curved pocket opening where there will most likely be stress.

I think I may have matched the pattern too well? Hard to see the pocket on the upper left.

For a jumpsuit with a waist seam: 
Pin each pants piece right sides together and sew the inner leg seams front to back.

 Turn one leg right side out and put it inside the other leg to pin, then sew, the center seam from front to back.

Slide⟶ the right-side-out leg into the wrong-side-out one, lining up the raw edges. 

I sewed this seam with blue thread, hoping it would make it more visible...

 Finish that seam, then pull the one leg out of the other to finish the pants inner leg seam as one continuous serge. Press the serged seams flat to one side. 

Serge the neck edge of the front and back top pieces each sleeve piece if making regular sleeves. (If you are making split sleeves, don't do this. see note On split sleeves below, between the 🔵🔴🔵) Pin the front edge of each sleeve to the front top piece, right sides together. Sew, starting at the bottom of the arm and ending at the finished neck edge, and finish those seams. Do the same for the back edge of each sleeve and the back top. You will now have a cross shape with a hole in the middle. Press the finished edges of the neckline to the wrong side, first 1/4 inch (6mm) then again 1/2 inch (12mm). Edgestitch starting from a sleeve seam, leaving an opening to insert the elastic.

Fold in half ⤼

Fold the cross shape in half right sides together so the edges of the sleeves meet, and the back and front meet. Sew up the sides, starting at the lower edge and ending at the sleeve ends. Serge or finish those seams, then press them flat toward the back. Press the hem of the sleeves to the wrong side by 1/4 inch (6mm), then by 1/2 inch (12mm). Edgestitch the hem, leaving an opening to insert elastic if you are using it.

Join the top and pants: Have the top inside out and the pants right side out. Line up the center seams of the pants with the center marks of the top front and back edge so that the pants are upside down inside the top, right sides together. 

Pin and sew. Pull the top up so the whole thing is wrong side out. Trim the seam allowances to 1/4 inch (5-6 mm), then press them open.

 

continue to the waistband below.

For a jumpsuit with a vertical center seam: 

Prepare the pockets as above, and sew them onto the body pieces where you marked -- 1 1/2 inch (3.5 cm) down from the waistband for a child, more for adults. 

Once you have attached the pockets, place the full body pieces right sides together and pin the front center seam. Sew and finish that seam. Do the same for the center back seam. Press them to one side. 

For regular sleeves, pin and sew the sleeve edges together, and finish those seams. (See note on split sleeves between the 🔵🔴🔵) Turn one sleeve right side out and align its edges with the armhole edge of the body piece. Pin, paying attention that the front edges and back edges match up. Start at the bottom of the armhole and sew toward the neckline on the front, then start again from the bottom sleeve seam to the back neckline. Do the same for the other sleeve, then finish both armhole seams. Press the seams toward the back, then press the hem edge of each sleeve first 1/4 inch (6mm), then 1/2 inch (12mm) to the wrong side. Edgestitch, leaving an opening to insert the elastic if you want to gather that edge. 

Serge all the way around the neckline to stabilize it, then press 1/4 inch, then 1/2 inch to the wrong side as well. Edgestitch the neckline, leaving an opening to insert the elastic.

Pin the inseam of each leg, then sew from the center down each to the bottom. Finish as one continuous serge, then press the seam toward the back. 

🔵🔴🔵

*On split sleeves: Mark the joins, 

I marked 1-inch (2.5 cm) lengths separating 3 1/2 inch (9 cm) "splits"... do as few or many as you see fit, making sure top and bottom are sewn together at least 1 1/4 inch (3.25 cm).

pin and sew. Press the edges to the wrong side 1/4 inch (6mm), 

then carefully edgestitch all along the edge. You'll have to bunch it up somewhat under the presser foot to get to the center, like this: 

For jumpsuit with a waist seam, sew the sides of the top together before attaching the completed split sleeves; for one with a center seam, attach the sleeves as given, starting at the bottom of the armhole. 

 🔵🔴🔵

 For both ways:
Prepare and attach the internal waistband: Press 1/2 inch (12mm) of each long edge of the waistband strip to the wrong side. Pin carefully to the marks on the wrong side of the jumpsuit, following the angle or curve of the waist markings.

Edgestitch the top edge, then the bottom edge, leaving an opening to insert the elastic.

Insert all the elastics with a bodkin or safety pin. I do the neckline, then the waist, then the sleeves. Check for fit before cutting and securing the elastics by overlapping the ends and sewing an X (If your machine has a crosshatch stitch, it works well to make a secure join). Close the openings stitc hand or machine.
Lastly, hem the pant legs: fold over 1/2 inch (12 mm), then as much as necessary to get the right length. Edgestitch or blind hem.

That's it, you're done! Test it out, (trampoline or a grassy hill optional) jump!

pretty-colored potato rolls -- again.

We're almost at summer! So summer-colored bread buns. Also, potato hotdog buns (which, to be fair, are also great made into lobster rolls -- just split through the top rather than the side)... Partly inspired by the purple burger buns at Hapa, and my previous colored potato braid. Potato rolls are a classic for sandwiches because potato has a sort of timed-release moisture action in the baked bun, keeping it moist and soft but sturdy enough to stand up to loading with filling. These are not quite as smooth as Martin's, but they are tasty and a bit more complex in flavor because of the sourdough.  

The potatoes -- purple and Yukon gold, microwaved (most microwaves have a potato setting! If yours doesn't, one large or two smaller potatoes will take about 3 1/2 to 4 minutes on high), cooled, peeled and mashed. These are purple regular potatoes, not Okinawan sweet potatoes or Filipino ube. They're really deep purple!

Sourdough Potato Hotdog Buns (two-color version) makes 16 hotdog buns or 10 120 g burger buns
sponge: 
100 g. bread flour
90 g. water
20 g honey
8 g active dry or instant yeast
Beat together in the mixer bowl and let rise 1-4 hours, until puffed and bubbly. (if you're using instant yeast, you may want to add half now and the other half with the starter.)

Add and mix in with the hook:
320 g starter, fed 6-10 hours before
180 g bread flour
8 g salt 
20 g dry milk powder (optional)
(let rest 15-20 minutes to autolyse, if you wish. It's not essential, but it makes a smoother, more consistent dough.) Mix the dough again and divide it in half. 

175 g each mashed purple and Yukon gold potatoes (or 350 g of one kind)
30 g butter (or margarine, or coconut oil)

(Of course if you just want one color you'll skip the dividing and just mix the potatoes in with the whole batch.)

Add the potato to each half and mix it in with the butter (15 g or 1 tbsp for each part.) It might take a bit of kneading on the counter to get a uniform color, (I'm kind of disappointed the yellow is not that vibrant), round, then place in lightly buttered bowls and let rise until doubled, about 40 minutes to an hour.

Smileyfaces in the risen dough!

 Fold the edges in to de-gas, then turn each out.

Divide each into pieces about 38 g each, and fold to pre-shape. (The two in the middle will be single-color, so they're 75 g each.)

Roll into 6-inch ropes and twist. 

Lay them on a nonstick mat or parchment,

cover with a lid or plastic, and let rise... they may touch, but that's okay.
 

Bake at 350 about 20 minutes, until browned and sound hollow when tapped (the crust will be firm, but it softens as it cools). Pull them off the sheet and allow to cool on a rack so the bottoms don't get soggy.

The interior crumb.

Enjoy! 

Lam-nation! Where we put butter into brioche because.

Laminating brioche? Why would you feel the need to do such a thing? Did I not just do a post about how lovely it is in and of itself?

Objectively that was a really good loaf, good for eating out of hand or sliced. But gilding the lily has its merits, especially if they look like this: 

So pretty right? Laminated brioche is just a little different from Danish, but they are very similar. I wanted to create a handheld pastry that was tall rather than flat, and maximized the baked flavors of orange and almond paste within the pretty layers.

This is based on Ciril Hitz' formula, but in a more manageable quantity and a few tweeks.

Laminated Brioche with Candied Orange and Almond - makes 24 small pastries

brioche dough:

35 g. milk

100 g. eggyolks

60 g. sugar

7.5 g active dry yeast

220 g. sourdough starter

360 g. bread flour

10 g. salt

grated zest from half an orange, optional 

75 g. butter, cubed and cool but not cold

Mix the liquids, sugar and yeast together in a mixer bowl. Add the flour and mix on low speed with the hook until the flour is moistened. Add the salt and orange zest, and mix on medium speed until the dough comes up off the sides of the bowl. (It will have a gluten window, but just barely.) Add the butter and mix on medium speed until it is smooth and elastic -- this will take a good 5-8 minutes.

Cover the bowl and let the brioche dough rise about an hour at room temperature.  

Put a bit of butter or spray on the inside of a gallon-size zip-close bag, and scrub it around to coat the inside. Cuff the opening over and stand the bag upright. Gather the sides of the risen brioche dough into the middle to de-gas, then ease it into the prepared bag. Press the air out, lay the bag on its side, then press the dough inside the bag to the corners into a flat square. Seal the bag and ferment in the fridge 4 hours to overnight. 

roll-in:

175 g. butter

Slice the butter into two or three pieces and place them on a silicone baking mat. With a rolling pin, smash and roll the cold butter to a flat square about 9 inches wide. (so much fun!)

Take the chilled brioche dough from the fridge and slit the bag down the side. Flour a surface lightly. Peel the bag open and, without folding the dough, flip the rectangle of brioche dough onto the surface. Press it with your fingertips into an even rectangle about 1/4 inch thick, 18 inches by 9 inches.

Use the mat to center the roll-in on the dough rectangle. 

 and fold the two edges to meet in the center. Seal the edges. 

 Use the rolling pin to press and roll the dough back out to a 9x18 inch rectangle, the short sides being 9 inches. Make the first 3-fold. 

Wrap the dough in plastic (or cover with the cut-open bag, tucking the ends under). Chill the dough for 30 minutes to an hour, then do another 2 3-folds back to back. Chill the completely laminated brioche dough for two hours, or up to three days, before shaping.

candied orange-almond filling:

280 g. almond paste

60 g. softened butter

pinch of salt

enough orange juice to bring it to a spreading consistency, about 30 g.

   Beat these together until they are light and smooth. Add 30-40 g. diced candied orange peel.

Roll the cold dough out to a rectangle 12x24 inches. Spread the filling on all the way to the short sides, trying to distribute the orange dice evenly top to bottom and side to side. 

fold one third down and one third up to form a 4x24 inch layered rectangle. Cut the rectangle crosswise into 1-inch strips. Place each strip in the cups of a small muffin pan (this is a flexible silicone one), giving the strip a half twist before putting the ends toward the bottom. I tried a few arrangements to show off the layers here. 

cover the filled pan with plastic wrap and let the pastries rise at room temperature about an hour, or in the fridge overnight. 

The brioche itself should feel light and airy when you press with a fingertip. Sprinkle a few almond slices on each one, attaching them to the moist almond filling. Bake the pastries at 360F about 12-15 minutes, until the filling is set and the pastry is nicely browned.

When they are just warm, gently ease them out of the pan to cool the bottoms and keep them from getting soggy. They are nice just dusted with confectioner's sugar,

 but I like to brush them with some melted orange marmalade to add some shine and tartness.

So delicious, just barely crispy/flaky and moist and tangy... and just a little different from the usual breakfast pastries.